Atlas Copco Sensor Press – 1089 9625 82
Quick Specs
– Part Number: 1089 9625 82
– Description: Pressure Sensor
– Product Status: Original
– Availability: In Stock
Sensor issues often mean unp lanned downtime.We prioritize same-day quotes for sensor inquiries,please contact us via WhatsApp for the fastest response.
WhatsApp: +86 176 2510 0968
The Atlas Copco 1089-9625-82 is a genuine pressure sensor with a 0-0.5 bar measuring range. This relatively narrow range suggests it’s used for differential pressure monitoring (such as filter or separator pressure drop) rather than main discharge pressure, which typically requires a much wider range. Send us your compressor model and controller generation, and we’ll verify the exact application and fit before you order.
Technical Details
| Part Number | 1089962582 |
| Description | Sensor Press |
| Brand | Atlas Copco |
| Status | Original |
| Sensor Type | Pressure Sensor |
| Measuring Range | 0-0.5 bar |
| Weight | 0.21kg |
| Dimension | 12*5*5cm |
| Packaging | Box |
| Availability | In Stock |
| Country of Origin | Germany |
Recommended Application
Likely differential pressure monitoring (e.g., filter/separator ΔP) — confirm against compressor model
Misdiagnosis Risk
A Faulty Sensor Doesn ‘t Always Look Faulty
A failed sensor doesn ‘t necessarily stop working — it can continue sending a signal that ‘s simply wrong,which is often harder to diagnose than a sensor that fai ls completely and triggers an obvious fault code. If you ‘re chasing an intermittent issue,an unexp lained shutdown,or a reading that doesn ‘t match physical symptoms (e.g.,the disp lay shows normal temperature but the unit feels hot),consider that the sensor itself — not the system it ‘s monitoring — may be the source of the false information.
Sensors Degrade Gradually,and Rarely Announce It
Unlike a mechanical part that fails visibly,a sensor ‘s accuracy can drift over years of service without triggering any alarm — the controller has no way to know the reading it ‘s receiving has becomes lightly wrong,only that a reading exists. This matters most for sensors tied to protective functions (like discharge temperature),where a drifted reading could delay a shutdown that should have happened,or trigger one that shouldn ‘t have.If a compressor is behaving inconsistently with what its display shows,an aging sensor is worth ruling out even if there ‘s no fault code pointing to it directly.
Common Questions
How do I know if this sensor matches my controller?
Send us your controller generation (e.g.,Elektronikon Mk4/Mk5) and the compressor model — signal type and measuring range must match,not just the physical connector.
Do sensors need periodic replacement even if there 's no fault?
Not typically on a fixed schedule,but sensors tied to protective functions are worth including in major service intervals,since gradual drift isn ‘t self-announcing.
The compressor is showing a reading,but it seems wrong — could the sensor be at fault?
Yes.A drifting or partially failed sensor can continue sending a signal without triggering a fault code,so an incorrect reading doesn ‘t rule out a sensor issue.
Should I keep a spare sensor on hand?
Many customers do,particularly for sensors tied to protective shutdown functions — a low-cost spare in stock can prevent an unplanned downtime scenario from turning into an extended one while waiting on a replacement.
Are these genuine Atlas Copco parts?
Yes.Parts are sourced through Atlas Copco distributor channels.
What is the typical lead time?
Common consumables (filters, oil) typically ship within about 1 week. Lead time for other spare parts depends on stock availability — please contact us for a confirmed schedule.
Do you inspect parts before shipment?
Yes. We provide full photos and video of the actual item before shipment, and confirm everything is correct with you prior to dispatch.
What shipping options are available?
If you have your own freight forwarder, we can ship to them directly. If not, we can provide shipping options based on your preference.