Atlas Copco Air Filter Element 21m³/min – 1613 9503 00

Quick Specs

– Part Number: 1613 9503 00
– Description: Air Filter Element 
– Brand: Atlas Copco
– Product Status: Original
– Availability: In Stock

Ready to order or need a lead time quote?
Our team responds within 24 hours.

WhatsApp: +86 176 2510 0968

The Atlas Copco Air Filter Element 1613-9503-00 (21 m³/min airflow rating) is a genuine intake filter for oil-injected screw compressors, referenced across the GA30, GA37, GA55, GA75 (including C, Plus, VSD, and W VSD variants), and GA90 range. The same physical filter position is also used across several other compressor brands under different part numbers — worth checking if you’re sourcing a replacement for a non-Atlas Copco unit that shares this filter housing design.

Technical Details

Part Number1613950300
DescriptionAir Filter Element 
BrandAtlas Copco
StatusOriginal
ConditionNew
Airflow Rating21m³/min
Weight1.95kg
Dimension42*25*25cm
PackagingCarton
AvailabilityIn Stock
Country of OriginGermany

Recommended Application

GA30, GA37, GA55, GA75 (C/Plus/VSD/W VSD), GA90 oil-injected screw compressors

How a Clogged Air Filter Actually Affects Your Compressor

Air filters don ‘t have a bypass valve — instead,as the filter media accumulates dust,airflow resistance increases gradually.This restriction forces the compressor to work harder to draw in the same volume of air,which can show up as reduced output pressure,higher energy consumption,or increased intake noise before the filter fully clogs.

Some compressors have a restriction indicator or vacuum gauge on the intake line — if yours does,that reading is a more reliable trigger for replacement than a fixed calendar interval,since dust accumulation depends entirely on your operating environment,not time alone.

Why Your Environment Matters More Than a Fixed Schedule

Unlike oil,which degrades on a relatively predictable time line,an air filter ‘s service life depends almost entirely on how much dust and particulate is in the air your compressor draws from.

A unit in a clean,climate-controlled plant room may run far longer than the manufacturer ‘s default interval;the same filter on a construction site or in a dusty industrial yard may need replacement several times more often.If you ‘re unsure how your environment compares to standard conditions,monitoring intake restriction ( if your unit has a gauge) is more accurate than relying on hours alone.

Common Questions

Without a gauge,the manufacturer ‘s recommended interval is your best default — but in dusty environments,visual inspection (checking for buildup)between scheduled changes is worth doing.

This depends on the filter media type — some are designed for cleaning,others are not and will lose filtration effectiveness if cleaned.Check your compressor ‘s manual before attempting to clean rather than replace.

Yes — restricted airflow forces the compressor to work harder for the same output,which can reduce efficiency and,in more severe cases,reduce achievable pressure.

Yes.Parts are sourced through Atlas Copco distributor channels.

Common consumables (filters, oil) typically ship within about 1 week. Lead time for other spare parts depends on stock availability — please contact us for a confirmed schedule.

 Yes. We provide full photos and video of the actual item before shipment, and confirm everything is correct with you prior to dispatch.

If you have your own freight forwarder, we can ship to them directly. If not, we can provide shipping options based on your preference.

Other Air Filters We Supply