Atlas Copco Solenoid Valve 110/50 – 1089 0702 13
Quick Specs
– Part Number: 1089 0702 13
– Description: Solenoid Valve
– Voltage Rating: 110V, 50Hz 4W
– Product Status: Original
– Availability: In Stock
Ready to order or need a lead time quote?
Our team responds within 24 hours.
WhatsApp: +86 176 2510 0968
The Atlas Copco Solenoid Valve 110/50 (part no. 1089-0702-13) is a genuine solenoid valve that controls air and oil circulation during load/unload cycling on oil-injected screw compressors. Rated 110V, 50Hz, 4W, with a maximum working pressure of 232 psi and a 0.8mm orifice (3/2-way configuration).
Technical Details
| Part Number | 1089070213 |
| Description | Solenoid Valve |
| Brand | Atlas Copco |
| Product Status | Original |
| Voltage/Power | 110V, 50Hz, 4W |
| Weight | 0.07kg |
| Dimension | 5*5*4cm |
| Max Pressure | 232 PSI |
| Orifice | 0.8mm, 3/2-way |
| Availability | In Stock |
| Country of Origin | Germany |
Equivalent / Replaced Part Numbers
– 1089070221
– 1089070205
– 1089070209
Compatibility and part numbers are for reference only.
Confirm Voltage and Connection Before Ordering
Solenoid valves are specified for a particular voltage (commonly 24V DC on compressor control circuits ,though this varies)and connector type.A valve that’s mechanically identical but wired for the wrong voltage won’t actuate correctly even when installed.Check your compressor’s electrical documentation or the marking on your existing valve before ordering.
Two Different Things Can Cause the Same Symptom
A solenoid valve that isn’t actuating can fail for an electrical reason (no signal reaching the coil ,a burnt-out coil,or a wiring fault)or a mechanical one (the valve body or plunger physically stuck ,often from contamination or corrosion).Testing whether the coil is receiving voltage when it should is a quick way to narrow down which side of the problem you’re dealing with before assuming the valve itself needs full replacement.
Common Questions
How do I know if it's an electrical or mechanical failure?
Check whether voltage is reaching the coil when the valve should actuate.If voltage is present but the valve doesn’t move,it’s likely mechanical (stuck valve body).If there’s no voltage,the issue is upstream — wiring,connector,or controller signal.
Can I just replace the coil instead of the whole valve?
On some designs ,yes — the coil and valve body are separate components.Confirm your valve’s construction before ordering to see if this is an option.
Are these genuine parts?
Yes. Parts are sourced through Atlas Copco distributor channels.
What payment methods do you accept?
T/T (bank transfer).
What is the typical lead time?
Common consumables (filters, oil) typically ship within about 1 week. Lead time for other spare parts depends on stock availability — please contact us for a confirmed schedule.
Do you inspect parts before shipment?
Yes. We provide full photos and video of the actual item before shipment, and confirm everything is correct with you prior to dispatch.
What shipping options are available?
If you have your own freight forwarder, we can ship to them directly. If not, we can provide shipping options based on your preference.
Other Solenoid Valves We Supply
– Part No.1089 0641 16 – Atlas Copco Valve Solenoid
– Part No.1635 2925 00 – Atlas Copco Solenoid Valve
– Part No.1089 0621 10 – Atlas Copco Solenoid Valve
– Part No.1089 0620 60 – Atlas Copco Solenoid Valve 50-60HZ VSD
– Part No.1089 0580 12 – Atlas Copco Valve Solenoid
– Part No.1089 0580 09 – Atlas Copco Valve Solenoid