Atlas Copco Can Vacuum Fluid Basic 20L – 1630 2030 00
Quick Specs
– Part Number: 1630 2030 00
– Description: Can Vacuum Fluid Basic
– Net Volume: 20L
– Base Oil Type: Mineral
– Product Status: Original
– Availability: In Stock
Ready to order or need a lead time quote?
Our team responds within 24 hours.
WhatsApp: +86 176 2510 0968
The Atlas Copco Vacuum Fluid Basic (part no. 1630-2030-00, 20L) is a mineral-based lubricant for Atlas Copco’s oil-sealed rotary screw vacuum pumps, referenced for the GHS 350-900 VSD range. The “Basic” designation in the product name suggests this sits at the standard/entry tier of Atlas Copco’s vacuum fluid lineup — worth confirming with us if your pump’s maintenance manual specifies a different grade, since vacuum pump fluids (unlike general compressor oils) are often tiered by performance level rather than just base oil chemistry.
As with any oil-sealed vacuum system, fluid condition directly affects achievable vacuum level — degraded or contaminated fluid is one of the most common causes of a pump failing to reach its rated vacuum, often before any mechanical wear is involved.
Technical Details
| Part Number | 1630203000 |
| Description | Can Vacuum Fluid |
| Brand | Atlas Copco |
| Status | Original |
| Base Oil Type | Mineral |
| Weight | 18kg |
| Dimension | 29*23*39cm |
| Net Volume | 20L |
| Packaging | Drum |
| Availability | In Stock |
| Country of Origin | France |
Recommended Application
Oil-Sealed Rotary Screw Vacuum Pumps,referenced for GHS 350-900 VSD range
Signs It's Time for an Oil Change
Rather than relying on a fixed time interval alone,watch for:
–A noticeable darkening or change in oil color/clarity
–Rising discharge or running temperature without a clear external cause
–Increased pressure differential across the oil separator
–Any burnt smell or unusual odor when checking the oil
If you notice any of these,it’s worth sampling the oil or scheduling a change ahead of your usual routine —running on degraded oil accelerates wear on the air end itself.
Compatibility When Switching Oil Brands
Before Switching Oil Brands
Different lubricant lines use different base oil chemistries (mineral, PAO synthetic ,PAG synthetic),and mixing incompatible types can cause sludging,emulsification,or seal swelling.If you’re switching from a different brand or type,confirm the base oil chemistry matches —or plan for a system flush before introducing a new type.
Common Questions
Can this oil be mixed with other brands or types?
We recommend against mixing different oil chemistries (mineral,PAO,PAG synthetic)unless confirmed compatible —mixing can cause sludging or reduced lubrication performance.If switching brands,a system flush is the safer option.
How long does one container last?
This depends on your compressor’s oil capacity and running hours — send us your compressor model and typical duty cycle,and we
can help estimate consumption.
How long can this oil be stored before use?
Unopened containers stored properly (sealed, indoors ,stable temperature)retain quality well.Once opened,we recommend using the oil within a reasonable timeframe rather than keeping it as long-term backup stock.
Are these genuine Atlas Copco lubricants?
Yes.Parts are sourced through Atlas Copco distributor channels.
Do I need to change the oil filter at the same time?
Yes — changing the oil filter alongside the oil itself is standard practice,since a saturated filter will contaminate fresh oil almost immediately.
Do you inspect parts before shipment?
Yes. We provide full photos and video of the actual item before shipment, and confirm everything is correct with you prior to dispatch.
What shipping options are available?
If you have your own freight forwarder, we can ship to them directly. If not, we can provide shipping options based on your preference.